Back to company website

You are not logged in. Please login or register.

Forum updated

We have recently updated our forums system, and we have cleared all spam topics and users. In case we accidentally deleted your account, please register again. If you miss a topic you have posted before, please let us know.

Post new reply

Post new reply

Compose and post your new reply

You may use: BBCode Smilies

All fields with bold label must be completed before the form is submitted.

Required information for guests


Required information

Topic review (newest first)

4 Post by dpryl

Dear zlzhang,
please see ATENA Troubleshooting, 2.2.19 How can I monitor a surface (or line) load?
Regards.

3 Post by zlzhang

Hello dpryl,
Thank you so much for your reply, I solve my problem. Still, I have a problem about the monitoring point. In my model, I made the seel plate surface resrained in z direction, and put the monitoring point on that surface to read the reaction force. Is the monitoring point represent the whole surface reaction or just for the single point ?

2 Post by dpryl

Dear zlzhang,
please follow Troubleshooting, 2.4.6 Floating point problems - Division by zero, Loss of >7 digits on the matrix diagonal, CCFEModelExc: CCPardiso solver error: zero pivot,  Warning: Sign of diagonal changed when reducing equation, Floating point exception: Multiple floating points traps, Zero or negative jacobian,  InvertA: zero determinant, CCMaterials Extended AExc: CC5ParamYield F: project_stress_on_f_division by zero, and similar.

If you still have problems/questions, see Troubleshooting, 2.1.1 for instructions to send us your model along with information about what you are modelling (description+sketches/photos).

Regards.

1 Post by zlzhang

Hello,
I'm try to modeling a I section beam with shear force at the middle point. However the analysis failed at step 1. I already read the Troubleshooting 2.4.4. , still fail to solve the problem. Here is part of the informaiton I get.

(*)    Invalid master-slave BC, selections for master(s) $N$M402653188S603979797, for slave(s) $N$M402653191S603979823 : 42.2222% slave nodes could not be constrained as required, specified in support id: 1, load case id 738197511, name: VOLUME 402653191 SURFACE 603979823 to VOLUME 402653188 SURFACE 603979797; BC ignored. More details in the Atena .err file.

(x)    CCFEModelExc: CCPardiso solver error: zero pivot, numerical factorization or iterative refinement problem, (possibly in equation: 0, node: 0, dof 0) in phase 33.